consoleTitle=Keycloak Admin Console

# Common messages
enabled=Enabled
hidden=Hidden
link-only-column=Link only
name=Name
displayName=Display name
displayNameHtml=HTML Display name
save=Save
cancel=Cancel
onText=ON
offText=OFF
client=Client
clients=Clients
clear=Clear
selectOne=Select One...

true=True
false=False

endpoints=Endpoints

# Realm settings
realm-detail.enabled.tooltip=Users and clients can only access a realm if it's enabled
realm-detail.oidc-endpoints.tooltip=Shows the configuration of the OpenID Connect endpoints
registrationAllowed=User registration
registrationAllowed.tooltip=Enable/disable the registration page. A link for registration will show on login page too.
registrationEmailAsUsername=Email as username
registrationEmailAsUsername.tooltip=If enabled then username field is hidden from registration form and email is used as username for new user.
editUsernameAllowed=Edit username
editUsernameAllowed.tooltip=If enabled, the username field is editable, readonly otherwise.
resetPasswordAllowed=Forgot password
resetPasswordAllowed.tooltip=Show a link on login page for user to click on when they have forgotten their credentials.
rememberMe=Remember Me
rememberMe.tooltip=Show checkbox on login page to allow user to remain logged in between browser restarts until session expires.
loginWithEmailAllowed=Login with email
loginWithEmailAllowed.tooltip=Allow users to log in with their email address.
duplicateEmailsAllowed=Duplicate emails
duplicateEmailsAllowed.tooltip=Allow multiple users to have the same email address. Changing this setting will also clear the users cache. It is recommended to manually update email constraints of existing users in the database after switching off support for duplicate email addresses.
verifyEmail=Verify email
verifyEmail.tooltip=Require the user to verify their email address the first time they login.
sslRequired=Require SSL
sslRequired.option.all=all requests
sslRequired.option.external=external requests
sslRequired.option.none=none
sslRequired.tooltip=Is HTTPS required? 'None' means HTTPS is not required for any client IP address. 'External requests' means localhost and private IP addresses can access without HTTPS. 'All requests' means HTTPS is required for all IP addresses.
publicKeys=Public keys
publicKey=Public key
privateKey=Private key
gen-new-keys=Generate new keys
certificate=Certificate
host=Host
smtp-host=SMTP Host
port=Port
smtp-port=SMTP Port (defaults to 25)
from=From
sender-email-addr=Sender Email Address
enable-ssl=Enable SSL
enable-start-tls=Enable StartTLS
enable-auth=Enable Authentication
username=Username
login-username=Login Username
password=Password
login-password=Login Password
login-theme=Login Theme
login-theme.tooltip=Select theme for login, TOTP, grant, registration, and forgot password pages.
account-theme=Account Theme
account-theme.tooltip=Select theme for user account management pages.
admin-console-theme=Admin Console Theme
select-theme-admin-console=Select theme for admin console.
email-theme=Email Theme
select-theme-email=Select theme for emails that are sent by the server.
i18n-enabled=Internationalization Enabled
supported-locales=Supported Locales
supported-locales.placeholder=Type a locale and enter
default-locale=Default Locale
realm-cache-clear=Realm Cache
realm-cache-clear.tooltip=Clears all entries from the realm cache (this will clear entries for all realms)
user-cache-clear=User Cache
user-cache-clear.tooltip=Clears all entries from the user cache (this will clear entries for all realms)
keys-cache-clear=Keys Cache
keys-cache-clear.tooltip=Clears all entries from the cache of external public keys. These are keys of external clients or identity providers. (this wil clear entries for all realms)
revoke-refresh-token=Revoke Refresh Token
revoke-refresh-token.tooltip=If enabled refresh tokens can only be used once. Otherwise refresh tokens are not revoked when used and can be used multiple times.
sso-session-idle=SSO Session Idle
seconds=Seconds
minutes=Minutes
hours=Hours
days=Days
sso-session-max=SSO Session Max
sso-session-idle.tooltip=Time a session is allowed to be idle before it expires. Tokens and browser sessions are invalidated when a session is expired.
sso-session-max.tooltip=Max time before a session is expired. Tokens and browser sessions are invalidated when a session is expired.
offline-session-idle=Offline Session Idle
offline-session-idle.tooltip=Time an offline session is allowed to be idle before it expires. You need to use offline token to refresh at least once within this period, otherwise offline session will expire.
access-token-lifespan=Access Token Lifespan
access-token-lifespan.tooltip=Max time before an access token is expired. This value is recommended to be short relative to the SSO timeout.
access-token-lifespan-for-implicit-flow=Access Token Lifespan For Implicit Flow
access-token-lifespan-for-implicit-flow.tooltip=Max time before an access token issued during OpenID Connect Implicit Flow is expired. This value is recommended to be shorter than SSO timeout. There is no possibility to refresh token during implicit flow, that's why there is separate timeout different to 'Access Token Lifespan'.
client-login-timeout=Client login timeout
client-login-timeout.tooltip=Max time an client has to finish the access token protocol. This should normally be 1 minute.
login-timeout=Login timeout
login-timeout.tooltip=Max time a user has to complete a login. This is recommended to be relatively long. 30 minutes or more.
login-action-timeout=Login action timeout
login-action-timeout.tooltip=Max time a user has to complete login related actions like update password or configure totp. This is recommended to be relatively long. 5 minutes or more.
headers=Headers
brute-force-detection=Brute Force Detection
x-frame-options=X-Frame-Options
x-frame-options-tooltip=Default value prevents pages from being included via non-origin iframes (click label for more information)
content-sec-policy=Content-Security-Policy
content-sec-policy-tooltip=Default value prevents pages from being included via non-origin iframes (click label for more information)
content-type-options=X-Content-Type-Options
content-type-options-tooltip=Default value prevents Internet Explorer and Google Chrome from MIME-sniffing a response away from the declared content-type (click label for more information)
max-login-failures=Max Login Failures
max-login-failures.tooltip=How many failures before wait is triggered.
wait-increment=Wait Increment
wait-increment.tooltip=When failure threshold has been met, how much time should the user be locked out?
quick-login-check-millis=Quick Login Check Milli Seconds
quick-login-check-millis.tooltip=If a failure happens concurrently too quickly, lock out the user.
min-quick-login-wait=Minimum Quick Login Wait
min-quick-login-wait.tooltip=How long to wait after a quick login failure.
max-wait=Max Wait
max-wait.tooltip=Max time a user will be locked out.
failure-reset-time=Failure Reset Time
failure-reset-time.tooltip=When will failure count be reset?
realm-tab-login=Login
realm-tab-keys=Keys
realm-tab-email=Email
realm-tab-themes=Themes
realm-tab-cache=Cache
realm-tab-tokens=Tokens
realm-tab-client-registration=Client Registration
realm-tab-security-defenses=Security Defenses
realm-tab-general=General
add-realm=Add realm

#Session settings
realm-sessions=Realm Sessions
revocation=Revocation
logout-all=Logout all
active-sessions=Active Sessions
sessions=Sessions
not-before=Not Before
not-before.tooltip=Revoke any tokens issued before this date.
set-to-now=Set to now
push=Push
push.tooltip=For every client that has an admin URL, notify them of the new revocation policy.

#Protocol Mapper
usermodel.prop.label=Property
usermodel.prop.tooltip=Name of the property method in the UserModel interface. For example, a value of 'email' would reference the UserModel.getEmail() method.
usermodel.attr.label=User Attribute
usermodel.attr.tooltip=Name of stored user attribute which is the name of an attribute within the UserModel.attribute map.
userSession.modelNote.label=User Session Note
userSession.modelNote.tooltip=Name of stored user session note within the UserSessionModel.note map.
multivalued.label=Multivalued
multivalued.tooltip=Indicates if attribute supports multiple values. If true, then the list of all values of this attribute will be set as claim. If false, then just first value will be set as claim
selectRole.label=Select Role
selectRole.tooltip=Enter role in the textbox to the left, or click this button to browse and select the role you want.
tokenClaimName.label=Token Claim Name
tokenClaimName.tooltip=Name of the claim to insert into the token. This can be a fully qualified name like 'address.street'. In this case, a nested json object will be created.
jsonType.label=Claim JSON Type
jsonType.tooltip=JSON type that should be used to populate the json claim in the token. long, int, boolean, and String are valid values.
includeInIdToken.label=Add to ID token
includeInIdToken.tooltip=Should the claim be added to the ID token?
includeInAccessToken.label=Add to access token
includeInAccessToken.tooltip=Should the claim be added to the access token?
includeInUserInfo.label=Add to userinfo
includeInUserInfo.tooltip=Should the claim be added to the userinfo?
usermodel.clientRoleMapping.clientId.label=Client ID
usermodel.clientRoleMapping.clientId.tooltip=Client ID for role mappings
usermodel.clientRoleMapping.rolePrefix.label=Client Role prefix
usermodel.clientRoleMapping.rolePrefix.tooltip=A prefix for each client role (optional).
usermodel.realmRoleMapping.rolePrefix.label=Realm Role prefix
usermodel.realmRoleMapping.rolePrefix.tooltip=A prefix for each Realm Role (optional).
sectorIdentifierUri.label=Sector Identifier URI
sectorIdentifierUri.tooltip=Providers that use pairwise sub values and support Dynamic Client Registration SHOULD use the sector_identifier_uri parameter. It provides a way for a group of websites under common administrative control to have consistent pairwise sub values independent of the individual domain names. It also provides a way for Clients to change redirect_uri domains without having to reregister all of their users.
pairwiseSubAlgorithmSalt.label=Salt
pairwiseSubAlgorithmSalt.tooltip=Salt used when calculating the pairwise subject identifier. If left blank, a salt will be generated.
addressClaim.street.label=User Attribute Name for Street
addressClaim.street.tooltip=Name of User Attribute, which will be used to map to 'street_address' subclaim inside 'address' token claim. Defaults to 'street' .
addressClaim.locality.label=User Attribute Name for Locality
addressClaim.locality.tooltip=Name of User Attribute, which will be used to map to 'locality' subclaim inside 'address' token claim. Defaults to 'locality' .
addressClaim.region.label=User Attribute Name for Region
addressClaim.region.tooltip=Name of User Attribute, which will be used to map to 'region' subclaim inside 'address' token claim. Defaults to 'region' .
addressClaim.postal_code.label=User Attribute Name for Postal Code
addressClaim.postal_code.tooltip=Name of User Attribute, which will be used to map to 'postal_code' subclaim inside 'address' token claim. Defaults to 'postal_code' .
addressClaim.country.label=User Attribute Name for Country
addressClaim.country.tooltip=Name of User Attribute, which will be used to map to 'country' subclaim inside 'address' token claim. Defaults to 'country' .
addressClaim.formatted.label=User Attribute Name for Formatted Address
addressClaim.formatted.tooltip=Name of User Attribute, which will be used to map to 'formatted' subclaim inside 'address' token claim. Defaults to 'formatted' .

# client details
clients.tooltip=Clients are trusted browser apps and web services in a realm. These clients can request a login. You can also define client specific roles.
search.placeholder=Search...
create=Create
import=Import
client-id=Client ID
base-url=Base URL
actions=Actions
not-defined=Not defined
edit=Edit
delete=Delete
no-results=No results
no-clients-available=No clients available
add-client=Add Client
select-file=Select file
view-details=View details
clear-import=Clear import
client-id.tooltip=Specifies ID referenced in URI and tokens. For example 'my-client'. For SAML this is also the expected issuer value from authn requests
client.name.tooltip=Specifies display name of the client. For example 'My Client'. Supports keys for localized values as well. For example\: ${my_client}
client.enabled.tooltip=Disabled clients cannot initiate a login or have obtain access tokens.
consent-required=Consent Required
consent-required.tooltip=If enabled users have to consent to client access.
client-protocol=Client Protocol
client-protocol.tooltip='OpenID connect' allows Clients to verify the identity of the End-User based on the authentication performed by an Authorization Server.'SAML' enables web-based authentication and authorization scenarios including cross-domain single sign-on (SSO) and uses security tokens containing assertions to pass information.
access-type=Access Type
access-type.tooltip='Confidential' clients require a secret to initiate login protocol. 'Public' clients do not require a secret. 'Bearer-only' clients are web services that never initiate a login.
standard-flow-enabled=Standard Flow Enabled
standard-flow-enabled.tooltip=This enables standard OpenID Connect redirect based authentication with authorization code. In terms of OpenID Connect or OAuth2 specifications, this enables support of 'Authorization Code Flow' for this client.
implicit-flow-enabled=Implicit Flow Enabled
implicit-flow-enabled.tooltip=This enables support for OpenID Connect redirect based authentication without authorization code. In terms of OpenID Connect or OAuth2 specifications, this enables support of 'Implicit Flow' for this client.
direct-access-grants-enabled=Direct Access Grants Enabled
direct-access-grants-enabled.tooltip=This enables support for Direct Access Grants, which means that client has access to username/password of user and exchange it directly with Keycloak server for access token. In terms of OAuth2 specification, this enables support of 'Resource Owner Password Credentials Grant' for this client.
service-accounts-enabled=Service Accounts Enabled
service-accounts-enabled.tooltip=Allows you to authenticate this client to Keycloak and retrieve access token dedicated to this client. In terms of OAuth2 specification, this enables support of 'Client Credentials Grant' for this client.
include-authnstatement=Include AuthnStatement
include-authnstatement.tooltip=Should a statement specifying the method and timestamp be included in login responses?
include-onetimeuse-condition=Include OneTimeUse Condition
include-onetimeuse-condition.tooltip=Should a OneTimeUse Condition be included in login responses?
sign-documents=Sign Documents
sign-documents.tooltip=Should SAML documents be signed by the realm?
sign-documents-redirect-enable-key-info-ext=Optimize REDIRECT signing key lookup
sign-documents-redirect-enable-key-info-ext.tooltip=When signing SAML documents in REDIRECT binding for SP that is secured by Keycloak adapter, should the ID of the signing key be included in SAML protocol message in <Extensions> element? This optimizes validation of the signature as the validating party uses a single key instead of trying every known key for validation.
sign-assertions=Sign Assertions
sign-assertions.tooltip=Should assertions inside SAML documents be signed? This setting isn't needed if document is already being signed.
signature-algorithm=Signature Algorithm
signature-algorithm.tooltip=The signature algorithm to use to sign documents.
canonicalization-method=Canonicalization Method
canonicalization-method.tooltip=Canonicalization Method for XML signatures.
encrypt-assertions=Encrypt Assertions
encrypt-assertions.tooltip=Should SAML assertions be encrypted with client's public key using AES?
client-signature-required=Client Signature Required
client-signature-required.tooltip=Will the client sign their saml requests and responses? And should they be validated?
force-post-binding=Force POST Binding
force-post-binding.tooltip=Always use POST binding for responses.
front-channel-logout=Front Channel Logout
front-channel-logout.tooltip=When true, logout requires a browser redirect to client. When false, server performs a background invocation for logout.
force-name-id-format=Force Name ID Format
force-name-id-format.tooltip=Ignore requested NameID subject format and use admin console configured one.
name-id-format=Name ID Format
name-id-format.tooltip=The name ID format to use for the subject.
root-url=Root URL
root-url.tooltip=Root URL appended to relative URLs
valid-redirect-uris=Valid Redirect URIs
valid-redirect-uris.tooltip=Valid URI pattern a browser can redirect to after a successful login or logout. Simple wildcards are allowed i.e. 'http://example.com/*'. Relative path can be specified too i.e. /my/relative/path/*. Relative paths are relative to the client root URL, or if none is specified the auth server root URL is used. For SAML, you must set valid URI patterns if you are relying on the consumer service URL embedded with the login request.
base-url.tooltip=Default URL to use when the auth server needs to redirect or link back to the client.
admin-url=Admin URL
admin-url.tooltip=URL to the admin interface of the client. Set this if the client supports the adapter REST API. This REST API allows the auth server to push revocation policies and other adminstrative tasks. Usually this is set to the base URL of the client.
master-saml-processing-url=Master SAML Processing URL
master-saml-processing-url.tooltip=If configured, this URL will be used for every binding to both the SP's Assertion Consumer and Single Logout Services. This can be individually overiden for each binding and service in the Fine Grain SAML Endpoint Configuration.
idp-sso-url-ref=IDP Initiated SSO URL Name
idp-sso-url-ref.tooltip=URL fragment name to reference client when you want to do IDP Initiated SSO. Leaving this empty will disable IDP Initiated SSO. The URL you will reference from your browser will be: {server-root}/realms/{realm}/protocol/saml/clients/{client-url-name}
idp-sso-relay-state=IDP Initiated SSO Relay State
idp-sso-relay-state.tooltip=Relay state you want to send with SAML request when you want to do IDP Initiated SSO.
web-origins=Web Origins
web-origins.tooltip=Allowed CORS origins. To permit all origins of Valid Redirect URIs add '+'. To permit all origins add '*'.
fine-oidc-endpoint-conf=Fine Grain OpenID Connect Configuration
fine-oidc-endpoint-conf.tooltip=Expand this section to configure advanced settings of this client related to OpenID Connect protocol
user-info-signed-response-alg=User Info Signed Response Algorithm
user-info-signed-response-alg.tooltip=JWA algorithm used for signed User Info Endpoint response. If set to 'unsigned', then User Info Response won't be signed and will be returned in application/json format.
request-object-signature-alg=Request Object Signature Algorithm
request-object-signature-alg.tooltip=JWA algorithm, which client needs to use when sending OIDC request object specified by 'request' or 'request_uri' parameters. If set to 'any', then Request object can be signed by any algorithm (including 'none' ).
fine-saml-endpoint-conf=Fine Grain SAML Endpoint Configuration
fine-saml-endpoint-conf.tooltip=Expand this section to configure exact URLs for Assertion Consumer and Single Logout Service.
assertion-consumer-post-binding-url=Assertion Consumer Service POST Binding URL
assertion-consumer-post-binding-url.tooltip=SAML POST Binding URL for the client's assertion consumer service (login responses). You can leave this blank if you do not have a URL for this binding.
assertion-consumer-redirect-binding-url=Assertion Consumer Service Redirect Binding URL
assertion-consumer-redirect-binding-url.tooltip=SAML Redirect Binding URL for the client's assertion consumer service (login responses). You can leave this blank if you do not have a URL for this binding.
logout-service-post-binding-url=Logout Service POST Binding URL
logout-service-post-binding-url.tooltip=SAML POST Binding URL for the client's single logout service. You can leave this blank if you are using a different binding
logout-service-redir-binding-url=Logout Service Redirect Binding URL
logout-service-redir-binding-url.tooltip=SAML Redirect Binding URL for the client's single logout service. You can leave this blank if you are using a different binding.
saml-signature-keyName-transformer=SAML Signature Key Name
saml-signature-keyName-transformer.tooltip=Signed SAML documents contain identification of signing key in KeyName element. For Keycloak / RH-SSO counterparty, use KEY_ID, for MS AD FS use CERT_SUBJECT, for others check and use NONE if no other option works.

# client import
import-client=Import Client
format-option=Format Option
select-format=Select a Format
import-file=Import File

# client tabs
settings=Settings
credentials=Credentials
saml-keys=SAML Keys
roles=Roles
mappers=Mappers
mappers.tooltip=Protocol mappers perform transformation on tokens and documents. They can do things like map user data into protocol claims, or just transform any requests going between the client and auth server.
scope=Scope
scope.tooltip=Scope mappings allow you to restrict which user role mappings are included within the access token requested by the client.
sessions.tooltip=View active sessions for this client. Allows you to see which users are active and when they logged in.
offline-access=Offline Access
offline-access.tooltip=View offline sessions for this client. Allows you to see which users retrieve offline token and when they retrieve it. To revoke all tokens for the client, go to Revocation tab and set not before value to now.
clustering=Clustering
installation=Installation
installation.tooltip=Helper utility for generating various client adapter configuration formats which you can download or cut and paste to configure your clients.
service-account-roles=Service Account Roles
service-account-roles.tooltip=Allows you to authenticate role mappings for the service account dedicated to this client.

# client credentials
client-authenticator=Client Authenticator
client-authenticator.tooltip=Client Authenticator used for authentication this client against Keycloak server
certificate.tooltip=Client Certificate for validate JWT issued by client and signed by Client private key from your keystore.
publicKey.tooltip=Public Key for validate JWT issued by client and signed by Client private key.
no-client-certificate-configured=No client certificate configured
gen-new-keys-and-cert=Generate new keys and certificate
import-certificate=Import Certificate
gen-client-private-key=Generate Client Private Key
generate-private-key=Generate Private Key
kid=Kid
kid.tooltip=KID (Key ID) of the client public key from imported JWKS.
use-jwks-url=Use JWKS URL
use-jwks-url.tooltip=If the switch is on, then client public keys will be downloaded from given JWKS URL. This allows great flexibility because new keys will be always re-downloaded again when client generates new keypair. If the switch is off, then public key (or certificate) from the Keycloak DB is used, so when client keypair changes, you always need to import new key (or certificate) to the Keycloak DB as well.
jwks-url=JWKS URL
jwks-url.tooltip=URL where client keys in JWK format are stored. See JWK specification for more details. If you use keycloak client adapter with "jwt" credential, then you can use URL of your app with '/k_jwks' suffix. For example 'http://www.myhost.com/myapp/k_jwks' .
archive-format=Archive Format
archive-format.tooltip=Java keystore or PKCS12 archive format.
key-alias=Key Alias
key-alias.tooltip=Archive alias for your private key and certificate.
key-password=Key Password
key-password.tooltip=Password to access the private key in the archive
store-password=Store Password
store-password.tooltip=Password to access the archive itself
generate-and-download=Generate and Download
client-certificate-import=Client Certificate Import
import-client-certificate=Import Client Certificate
jwt-import.key-alias.tooltip=Archive alias for your certificate.
secret=Secret
regenerate-secret=Regenerate Secret
registrationAccessToken=Registration access token
registrationAccessToken.regenerate=Regenerate registration access token
registrationAccessToken.tooltip=The registration access token provides access for clients to the client registration service.
add-role=Add Role
role-name=Role Name
composite=Composite
description=Description
no-client-roles-available=No client roles available
scope-param-required=Scope Param Required
scope-param-required.tooltip=This role will only be granted if scope parameter with role name is used during authorization/token request.
composite-roles=Composite Roles
composite-roles.tooltip=When this role is (un)assigned to a user any role associated with it will be (un)assigned implicitly.
realm-roles=Realm Roles
available-roles=Available Roles
add-selected=Add selected
associated-roles=Associated Roles
composite.associated-realm-roles.tooltip=Realm level roles associated with this composite role.
composite.available-realm-roles.tooltip=Realm level roles that you can associate to this composite role.
remove-selected=Remove selected
client-roles=Client Roles
select-client-to-view-roles=Select client to view roles for client
available-roles.tooltip=Roles from this client that you can associate to this composite role.
client.associated-roles.tooltip=Client roles associated with this composite role.
add-builtin=Add Builtin
category=Category
type=Type
no-mappers-available=No mappers available
add-builtin-protocol-mappers=Add Builtin Protocol Mappers
add-builtin-protocol-mapper=Add Builtin Protocol Mapper
scope-mappings=Scope Mappings
full-scope-allowed=Full Scope Allowed
full-scope-allowed.tooltip=Allows you to disable all restrictions.
scope.available-roles.tooltip=Realm level roles that can be assigned to scope.
assigned-roles=Assigned Roles
assigned-roles.tooltip=Realm level roles assigned to scope.
effective-roles=Effective Roles
realm.effective-roles.tooltip=Assigned realm level roles that may have been inherited from a composite role.
select-client-roles.tooltip=Select client to view roles for client
assign.available-roles.tooltip=Client roles available to be assigned.
client.assigned-roles.tooltip=Assigned client roles.
client.effective-roles.tooltip=Assigned client roles that may have been inherited from a composite role.
basic-configuration=Basic configuration
node-reregistration-timeout=Node Re-registration Timeout
node-reregistration-timeout.tooltip=Interval to specify max time for registered clients cluster nodes to re-register. If cluster node won't send re-registration request to Keycloak within this time, it will be unregistered from Keycloak
registered-cluster-nodes=Registered cluster nodes
register-node-manually=Register node manually
test-cluster-availability=Test cluster availability
last-registration=Last registration
node-host=Node host
no-registered-cluster-nodes=No registered cluster nodes available
cluster-nodes=Cluster Nodes
add-node=Add Node
active-sessions.tooltip=Total number of active user sessions for this client.
show-sessions=Show Sessions
show-sessions.tooltip=Warning, this is a potentially expensive operation depending on number of active sessions.
user=User
from-ip=From IP
session-start=Session Start
first-page=First Page
previous-page=Previous Page
next-page=Next Page
client-revoke.not-before.tooltip=Revoke any tokens issued before this date for this client.
client-revoke.push.tooltip=If admin URL is configured for this client, push this policy to that client.
select-a-format=Select a Format
download=Download
offline-tokens=Offline Tokens
offline-tokens.tooltip=Total number of offline tokens for this client.
show-offline-tokens=Show Offline Tokens
show-offline-tokens.tooltip=Warning, this is a potentially expensive operation depending on number of offline tokens.
token-issued=Token Issued
last-access=Last Access
last-refresh=Last Refresh
key-export=Key Export
key-import=Key Import
export-saml-key=Export SAML Key
import-saml-key=Import SAML Key
realm-certificate-alias=Realm Certificate Alias
realm-certificate-alias.tooltip=Realm certificate is stored in archive too. This is the alias to it.
signing-key=Signing Key
saml-signing-key=SAML Signing Key.
private-key=Private Key
generate-new-keys=Generate new keys
export=Export
encryption-key=Encryption Key
saml-encryption-key.tooltip=SAML Encryption Key.
service-accounts=Service Accounts
service-account.available-roles.tooltip=Realm level roles that can be assigned to service account.
service-account.assigned-roles.tooltip=Realm level roles assigned to service account.
service-account-is-not-enabled-for=Service account is not enabled for {{client}}
create-protocol-mappers=Create Protocol Mappers
create-protocol-mapper=Create Protocol Mapper
protocol=Protocol
protocol.tooltip=Protocol...
id=ID
mapper.name.tooltip=Name of the mapper.
mapper.consent-required.tooltip=When granting temporary access, must the user consent to providing this data to the client?
consent-text=Consent Text
consent-text.tooltip=Text to display on consent page.
mapper-type=Mapper Type
mapper-type.tooltip=Type of the mapper
# realm identity providers
identity-providers=Identity Providers
table-of-identity-providers=Table of identity providers
add-provider.placeholder=Add provider...
provider=Provider
gui-order=GUI order
first-broker-login-flow=First Login Flow
post-broker-login-flow=Post Login Flow
redirect-uri=Redirect URI
redirect-uri.tooltip=The redirect uri to use when configuring the identity provider.
alias=Alias
display-name=Display Name
identity-provider.alias.tooltip=The alias uniquely identifies an identity provider and it is also used to build the redirect uri.
identity-provider.display-name.tooltip=Friendly name for Identity Providers.
identity-provider.enabled.tooltip=Enable/disable this identity provider.
authenticate-by-default=Authenticate by Default
identity-provider.authenticate-by-default.tooltip=Indicates if this provider should be tried by default for authentication even before displaying login screen.
store-tokens=Store Tokens
identity-provider.store-tokens.tooltip=Enable/disable if tokens must be stored after authenticating users.
stored-tokens-readable=Stored Tokens Readable
identity-provider.stored-tokens-readable.tooltip=Enable/disable if new users can read any stored tokens. This assigns the broker.read-token role.
disableUserInfo=Disable User Info
identity-provider.disableUserInfo.tooltip=Disable usage of User Info service to obtain additional user information?  Default is to use this OIDC service.
userIp=Use userIp Param
identity-provider.google-userIp.tooltip=Set 'userIp' query parameter when invoking on Google's User Info service.  This will use the user's ip address.  Useful if Google is throttling access to the User Info service.
update-profile-on-first-login=Update Profile on First Login
on=On
on-missing-info=On missing info
off=Off
update-profile-on-first-login.tooltip=Define conditions under which a user has to update their profile during first-time login.
trust-email=Trust Email
trust-email.tooltip=If enabled then email provided by this provider is not verified even if verification is enabled for the realm.
link-only=Account Linking Only
link-only.tooltip=If true, users cannot log in through this provider.  They can only link to this provider.  This is useful if you don't want to allow login from the provider, but want to integrate with a provider
hide-on-login-page=Hide on Login Page
hide-on-login-page.tooltip=If hidden, then login with this provider is possible only if requested explicitly, e.g. using the 'kc_idp_hint' parameter.
gui-order.tooltip=Number defining order of the provider in GUI (eg. on Login page).
first-broker-login-flow.tooltip=Alias of authentication flow, which is triggered after first login with this identity provider. Term 'First Login' means that there is not yet existing Keycloak account linked with the authenticated identity provider account.
post-broker-login-flow.tooltip=Alias of authentication flow, which is triggered after each login with this identity provider. Useful if you want additional verification of each user authenticated with this identity provider (for example OTP). Leave this empty if you don't want any additional authenticators to be triggered after login with this identity provider. Also note, that authenticator implementations must assume that user is already set in ClientSession as identity provider already set it.
openid-connect-config=OpenID Connect Config
openid-connect-config.tooltip=OIDC SP and external IDP configuration.
authorization-url=Authorization URL
authorization-url.tooltip=The Authorization Url.
token-url=Token URL
token-url.tooltip=The Token URL.
logout-url=Logout URL
identity-provider.logout-url.tooltip=End session endpoint to use to logout user from external IDP.
backchannel-logout=Backchannel Logout
backchannel-logout.tooltip=Does the external IDP support backchannel logout?
user-info-url=User Info URL
user-info-url.tooltip=The User Info Url. This is optional.
identity-provider.client-id.tooltip=The client or client identifier registered within the identity provider.
client-secret=Client Secret
show-secret=Show secret
hide-secret=Hide secret
client-secret.tooltip=The client or client secret registered within the identity provider.
issuer=Issuer
issuer.tooltip=The issuer identifier for the issuer of the response. If not provided, no validation will be performed.
default-scopes=Default Scopes
identity-provider.default-scopes.tooltip=The scopes to be sent when asking for authorization. It can be a space-separated list of scopes. Defaults to 'openid'.
prompt=Prompt
unspecified.option=unspecified
none.option=none
consent.option=consent
login.option=login
select-account.option=select_account
prompt.tooltip=Specifies whether the Authorization Server prompts the End-User for reauthentication and consent.
validate-signatures=Validate Signatures
identity-provider.validate-signatures.tooltip=Enable/disable signature validation of external IDP signatures.
identity-provider.use-jwks-url.tooltip=If the switch is on, then identity provider public keys  will be downloaded from given JWKS URL. This allows great flexibility because new keys will be always re-downloaded again when identity provider generates new keypair. If the switch is off, then public key (or certificate) from the Keycloak DB is used, so when identity provider keypair changes, you always need to import new key to the Keycloak DB as well.
identity-provider.jwks-url.tooltip=URL where identity provider keys in JWK format are stored. See JWK specification for more details. If you use external keycloak identity provider, then you can use URL like 'http://broker-keycloak:8180/auth/realms/test/protocol/openid-connect/certs' assuming your brokered keycloak is running on 'http://broker-keycloak:8180' and it's realm is 'test' .
validating-public-key=Validating Public Key
identity-provider.validating-public-key.tooltip=The public key in PEM format that must be used to verify external IDP signatures.
validating-public-key-id=Validating Public Key Id
identity-provider.validating-public-key-id.tooltip=Explicit ID of the validating public key given above if the key ID. Leave blank if the key above should be used always, regardless of key ID specified by external IDP; set it if the key should only be used for verifying if key ID from external IDP matches.
import-external-idp-config=Import External IDP Config
import-external-idp-config.tooltip=Allows you to load external IDP metadata from a config file or to download it from a URL.
import-from-url=Import from URL
identity-provider.import-from-url.tooltip=Import metadata from a remote IDP discovery descriptor.
import-from-file=Import from file
identity-provider.import-from-file.tooltip=Import metadata from a downloaded IDP discovery descriptor.
saml-config=SAML Config
identity-provider.saml-config.tooltip=SAML SP and external IDP configuration.
single-signon-service-url=Single Sign-On Service URL
saml.single-signon-service-url.tooltip=The Url that must be used to send authentication requests (SAML AuthnRequest).
single-logout-service-url=Single Logout Service URL
saml.single-logout-service-url.tooltip=The Url that must be used to send logout requests.
nameid-policy-format=NameID Policy Format
nameid-policy-format.tooltip=Specifies the URI reference corresponding to a name identifier format. Defaults to urn:oasis:names:tc:SAML:2.0:nameid-format:persistent.
http-post-binding-response=HTTP-POST Binding Response
http-post-binding-response.tooltip=Indicates whether to respond to requests using HTTP-POST binding. If false, HTTP-REDIRECT binding will be used.
http-post-binding-for-authn-request=HTTP-POST Binding for AuthnRequest
http-post-binding-for-authn-request.tooltip=Indicates whether the AuthnRequest must be sent using HTTP-POST binding. If false, HTTP-REDIRECT binding will be used.
http-post-binding-logout=HTTP-POST Binding Logout
http-post-binding-logout.tooltip=Indicates whether to respond to requests using HTTP-POST binding. If false, HTTP-REDIRECT binding will be used.
want-authn-requests-signed=Want AuthnRequests Signed
want-authn-requests-signed.tooltip=Indicates whether the identity provider expects signed a AuthnRequest.
force-authentication=Force Authentication
identity-provider.force-authentication.tooltip=Indicates whether the identity provider must authenticate the presenter directly rather than rely on a previous security context.
validate-signature=Validate Signature
saml.validate-signature.tooltip=Enable/disable signature validation of SAML responses.
validating-x509-certificate=Validating X509 Certificates
validating-x509-certificate.tooltip=The certificate in PEM format that must be used to check for signatures. Multiple certificates can be entered, separated by comma (,).
saml.import-from-url.tooltip=Import metadata from a remote IDP SAML entity descriptor.
social.client-id.tooltip=The client identifier registered with the identity provider.
social.client-secret.tooltip=The client secret registered with the identity provider.
social.default-scopes.tooltip=The scopes to be sent when asking for authorization. See documentation for possible values, separator and default value'.
key=Key
stackoverflow.key.tooltip=The Key obtained from Stack Overflow client registration.

# User federation
sync-ldap-roles-to-keycloak=Sync LDAP Roles To Keycloak
sync-keycloak-roles-to-ldap=Sync Keycloak Roles To LDAP
sync-ldap-groups-to-keycloak=Sync LDAP Groups To Keycloak
sync-keycloak-groups-to-ldap=Sync Keycloak Groups To LDAP

realms=Realms
realm=Realm

identity-provider-mappers=Identity Provider Mappers
create-identity-provider-mapper=Create Identity Provider Mapper
add-identity-provider-mapper=Add Identity Provider Mapper
client.description.tooltip=Specifies description of the client. For example 'My Client for TimeSheets'. Supports keys for localized values as well. For example\: ${my_client_description}

expires=Expires
expiration=Expiration
expiration.tooltip=Specifies how long the token should be valid
count=Count
count.tooltip=Specifies how many clients can be created using the token
remainingCount=Remaining Count
created=Created
back=Back
initial-access-tokens=Initial Access Tokens
add-initial-access-tokens=Add Initial Access Token
initial-access-token=Initial Access Token
initial-access.copyPaste.tooltip=Copy/paste the initial access token before navigating away from this page as it's not posible to retrieve later
continue=Continue
initial-access-token.confirm.title=Copy Initial Access Token
initial-access-token.confirm.text=Please copy and paste the initial access token before confirming as it can't be retrieved later
no-initial-access-available=No Initial Access Tokens available

client-reg-policies=Client Registration Policies
client-reg-policy.name.tooltip=Display Name of the policy
anonymous-policies=Anonymous Access Policies
anonymous-policies.tooltip=Those Policies are used when Client Registration Service is invoked by unauthenticated request. This means request doesn't contain Initial Access Token nor Bearer Token.
auth-policies=Authenticated Access Policies
auth-policies.tooltip=Those Policies are used when Client Registration Service is invoked by authenticated request. This means request contains Initial Access Token or Bearer Token.
policy-name=Policy Name
no-client-reg-policies-configured=No Client Registration Policies
trusted-hosts.label=Trusted Hosts
trusted-hosts.tooltip=List of Hosts, which are trusted and are allowed to invoke Client Registration Service and/or be used as values of Client URIs. You can use hostnames or IP addresses. If you use star at the beginning (for example '*.example.com' ) then whole domain example.com will be trusted.
host-sending-registration-request-must-match.label=Host Sending Client Registration Request Must Match
host-sending-registration-request-must-match.tooltip=If on, then any request to Client Registration Service is allowed just if it was sent from some trusted host or domain.
client-uris-must-match.label=Client URIs Must Match
client-uris-must-match.tooltip=If on, then all Client URIs (Redirect URIs and others) are allowed just if they match some trusted host or domain.
allowed-protocol-mappers.label=Allowed Protocol Mappers
allowed-protocol-mappers.tooltip=Whitelist of allowed protocol mapper providers. If there is an attempt to register client, which contains some protocol mappers, which were not whitelisted, then registration request will be rejected.
consent-required-for-all-mappers.label=Consent Required For Mappers
consent-required-for-all-mappers.tooltip=If on, then all newly registered protocol mappers will automatically have consentRequired switch on. This means that user will need to approve consent screen. NOTE: Consent screen is shown just if client has consentRequired switch on. So it's usually good to use this switch together with consent-required policy.
allowed-client-templates.label=Allowed Client Templates
allowed-client-templates.tooltip=Whitelist of the client templates, which can be used on newly registered client. Attempt to register client with some client template, which is not whitelisted, will be rejected. By default, the whitelist is empty, so there are not any client templates are allowed.
max-clients.label=Max Clients Per Realm
max-clients.tooltip=It won't be allowed to register new client if count of existing clients in realm is same or bigger than configured limit.

client-templates=Client Templates
client-templates.tooltip=Client templates allow you to define common configuration that is shared between multiple clients

groups=Groups

group.add-selected.tooltip=Realm roles that can be assigned to the group.
group.assigned-roles.tooltip=Realm roles mapped to the group
group.effective-roles.tooltip=All realm role mappings. Some roles here might be inherited from a mapped composite role.
group.available-roles.tooltip=Assignable roles from this client.
group.assigned-roles-client.tooltip=Role mappings for this client.
group.effective-roles-client.tooltip=Role mappings for this client. Some roles here might be inherited from a mapped composite role.

default-roles=Default Roles
no-realm-roles-available=No realm roles available

users=Users
user.add-selected.tooltip=Realm roles that can be assigned to the user.
user.assigned-roles.tooltip=Realm roles mapped to the user
user.effective-roles.tooltip=All realm role mappings. Some roles here might be inherited from a mapped composite role.
user.available-roles.tooltip=Assignable roles from this client.
user.assigned-roles-client.tooltip=Role mappings for this client.
user.effective-roles-client.tooltip=Role mappings for this client. Some roles here might be inherited from a mapped composite role.
default.available-roles.tooltip=Realm level roles that can be assigned.
realm-default-roles=Realm Default Roles
realm-default-roles.tooltip=Realm level roles assigned to new users.
default.available-roles-client.tooltip=Roles from this client that are assignable as a default.
client-default-roles=Client Default Roles
client-default-roles.tooltip=Roles from this client assigned as a default role.
composite.available-roles.tooltip=Realm level roles that you can associate to this composite role.
composite.associated-roles.tooltip=Realm level roles associated with this composite role.
composite.available-roles-client.tooltip=Roles from this client that you can associate to this composite role.
composite.associated-roles-client.tooltip=Client roles associated with this composite role.
partial-import=Partial Import
partial-import.tooltip=Partial import allows you to import users, clients, and other resources from a previously exported json file.

file=File
exported-json-file=Exported json file
import-from-realm=Import from realm
import-users=Import users
import-groups=Import groups
import-clients=Import clients
import-identity-providers=Import identity providers
import-realm-roles=Import realm roles
import-client-roles=Import client roles
if-resource-exists=If a resource exists
fail=Fail
skip=Skip
overwrite=Overwrite
if-resource-exists.tooltip=Specify what should be done if you try to import a resource that already exists.

action=Action
role-selector=Role Selector
realm-roles.tooltip=Realm roles that can be selected.

select-a-role=Select a role
select-realm-role=Select realm role
client-roles.tooltip=Client roles that can be selected.
select-client-role=Select client role

client-template=Client Template
client-template.tooltip=Client template this client inherits configuration from
client-saml-endpoint=Client SAML Endpoint
add-client-template=Add client template

manage=Manage
authentication=Authentication
user-federation=User Federation
user-storage=User Storage
events=Events
realm-settings=Realm Settings
configure=Configure
select-realm=Select realm
add=Add

client-template.name.tooltip=Name of the client template. Must be unique in the realm
client-template.description.tooltip=Description of the client template
client-template.protocol.tooltip=Which SSO protocol configuration is being supplied by this client template

add-user-federation-provider=Add user federation provider
add-user-storage-provider=Add user storage provider
required-settings=Required Settings
provider-id=Provider ID
console-display-name=Console Display Name
console-display-name.tooltip=Display name of provider when linked in admin console.
priority=Priority
priority.tooltip=Priority of provider when doing a user lookup. Lowest first.
sync-settings=Sync Settings
periodic-full-sync=Periodic Full Sync
periodic-full-sync.tooltip=Does periodic full synchronization of provider users to Keycloak should be enabled or not
full-sync-period=Full Sync Period
full-sync-period.tooltip=Period for full synchronization in seconds
periodic-changed-users-sync=Periodic Changed Users Sync
periodic-changed-users-sync.tooltip=Does periodic synchronization of changed or newly created provider users to Keycloak should be enabled or not
changed-users-sync-period=Changed Users Sync Period
changed-users-sync-period.tooltip=Period for synchronization of changed or newly created provider users in seconds
synchronize-changed-users=Synchronize changed users
synchronize-all-users=Synchronize all users
remove-imported-users=Remove imported
unlink-users=Unlink users
kerberos-realm=Kerberos Realm
kerberos-realm.tooltip=Name of kerberos realm. For example FOO.ORG
server-principal=Server Principal
server-principal.tooltip=Full name of server principal for HTTP service including server and domain name. For example HTTP/host.foo.org@FOO.ORG
keytab=KeyTab
keytab.tooltip=Location of Kerberos KeyTab file containing the credentials of server principal. For example /etc/krb5.keytab
debug=Debug
debug.tooltip=Enable/disable debug logging to standard output for Krb5LoginModule.
allow-password-authentication=Allow Password Authentication
allow-password-authentication.tooltip=Enable/disable possibility of username/password authentication against Kerberos database
edit-mode=Edit Mode
edit-mode.tooltip=READ_ONLY means that password updates are not allowed and user always authenticates with Kerberos password. UNSYNCED means user can change his password in Keycloak database and this one will be used instead of Kerberos password then
ldap.edit-mode.tooltip=READ_ONLY is a read only LDAP store. WRITABLE means data will be synced back to LDAP on demand. UNSYNCED means user data will be imported, but not synced back to LDAP.
update-profile-first-login=Update Profile First Login
update-profile-first-login.tooltip=Update profile on first login
sync-registrations=Sync Registrations
ldap.sync-registrations.tooltip=Should newly created users be created within LDAP store? Priority effects which provider is chose to sync the new user.
import-enabled=Import Users
ldap.import-enabled.tooltip=If true, LDAP users will be imported into Keycloak DB and synced via the configured sync policies.
vendor=Vendor
ldap.vendor.tooltip=LDAP vendor (provider)
username-ldap-attribute=Username LDAP attribute
ldap-attribute-name-for-username=LDAP attribute name for username
username-ldap-attribute.tooltip=Name of LDAP attribute, which is mapped as Keycloak username. For many LDAP server vendors it can be 'uid'. For Active directory it can be 'sAMAccountName' or 'cn'. The attribute should be filled for all LDAP user records you want to import from LDAP to Keycloak.
rdn-ldap-attribute=RDN LDAP attribute
ldap-attribute-name-for-user-rdn=LDAP attribute name for user RDN
rdn-ldap-attribute.tooltip=Name of LDAP attribute, which is used as RDN (top attribute) of typical user DN. Usually it's the same as Username LDAP attribute, however it's not required. For example for Active directory it's common to use 'cn' as RDN attribute when username attribute might be 'sAMAccountName'.
uuid-ldap-attribute=UUID LDAP attribute
ldap-attribute-name-for-uuid=LDAP attribute name for UUID
uuid-ldap-attribute.tooltip=Name of LDAP attribute, which is used as unique object identifier (UUID) for objects in LDAP. For many LDAP server vendors it's 'entryUUID' however some are different. For example for Active directory it should be 'objectGUID'. If your LDAP server really doesn't support the notion of UUID, you can use any other attribute, which is supposed to be unique among LDAP users in tree. For example 'uid' or 'entryDN'.
user-object-classes=User Object Classes
ldap-user-object-classes.placeholder=LDAP User Object Classes (div. by comma)

ldap-connection-url=LDAP connection URL
ldap-users-dn=LDAP Users DN
ldap-bind-dn=LDAP Bind DN
ldap-bind-credentials=LDAP Bind Credentials
ldap-filter=LDAP Filter
ldap.user-object-classes.tooltip=All values of LDAP objectClass attribute for users in LDAP divided by comma. For example: 'inetOrgPerson, organizationalPerson' . Newly created Keycloak users will be written to LDAP with all those object classes and existing LDAP user records are found just if they contain all those object classes.

connection-url=Connection URL
ldap.connection-url.tooltip=Connection URL to your LDAP server
test-connection=Test connection
users-dn=Users DN
ldap.users-dn.tooltip=Full DN of LDAP tree where your users are. This DN is parent of LDAP users. It could be for example 'ou=users,dc=example,dc=com' assuming that your typical user will have DN like 'uid=john,ou=users,dc=example,dc=com'
authentication-type=Authentication Type
ldap.authentication-type.tooltip=LDAP Authentication type. Right now just 'none' (anonymous LDAP authentication) or 'simple' (Bind credential + Bind password authentication) mechanisms are available
bind-dn=Bind DN
ldap.bind-dn.tooltip=DN of LDAP admin, which will be used by Keycloak to access LDAP server
bind-credential=Bind Credential
ldap.bind-credential.tooltip=Password of LDAP admin
test-authentication=Test authentication
custom-user-ldap-filter=Custom User LDAP Filter
ldap.custom-user-ldap-filter.tooltip=Additional LDAP Filter for filtering searched users. Leave this empty if you don't need additional filter. Make sure that it starts with '(' and ends with ')'
search-scope=Search Scope
ldap.search-scope.tooltip=For one level, we search for users just in DNs specified by User DNs. For subtree, we search in whole of their subtree. See LDAP documentation for more details
use-truststore-spi=Use Truststore SPI
ldap.use-truststore-spi.tooltip=Specifies whether LDAP connection will use the truststore SPI with the truststore configured in standalone.xml/domain.xml. 'Always' means that it will always use it. 'Never' means that it won't use it. 'Only for ldaps' means that it will use if your connection URL use ldaps. Note even if standalone.xml/domain.xml is not configured, the default Java cacerts or certificate specified by 'javax.net.ssl.trustStore' property will be used.
connection-pooling=Connection Pooling
ldap-connection-timeout=Connection Timeout
ldap.connection-timeout.tooltip=LDAP Connection Timeout in milliseconds
ldap-read-timeout=Read Timeout
ldap.read-timeout.tooltip=LDAP Read Timeout in milliseconds. This timeout applies for LDAP read operations
ldap.connection-pooling.tooltip=Does Keycloak should use connection pooling for accessing LDAP server
ldap.pagination.tooltip=Does the LDAP server support pagination.
kerberos-integration=Kerberos Integration
allow-kerberos-authentication=Allow Kerberos authentication
ldap.allow-kerberos-authentication.tooltip=Enable/disable HTTP authentication of users with SPNEGO/Kerberos tokens. The data about authenticated users will be provisioned from this LDAP server
use-kerberos-for-password-authentication=Use Kerberos For Password Authentication
ldap.use-kerberos-for-password-authentication.tooltip=Use Kerberos login module for authenticate username/password against Kerberos server instead of authenticating against LDAP server with Directory Service API
batch-size=Batch Size
ldap.batch-size.tooltip=Count of LDAP users to be imported from LDAP to Keycloak within single transaction.
ldap.periodic-full-sync.tooltip=Does periodic full synchronization of LDAP users to Keycloak should be enabled or not
ldap.periodic-changed-users-sync.tooltip=Does periodic synchronization of changed or newly created LDAP users to Keycloak should be enabled or not
ldap.changed-users-sync-period.tooltip=Period for synchronization of changed or newly created LDAP users in seconds
user-federation-mappers=User Federation Mappers
create-user-federation-mapper=Create user federation mapper
add-user-federation-mapper=Add user federation mapper
provider-name=Provider Name
no-user-federation-providers-configured=No user federation providers configured
no-user-storage-providers-configured=No user storage providers configured
add-identity-provider=Add identity provider
add-identity-provider-link=Add identity provider link
identity-provider=Identity Provider
identity-provider-user-id=Identity Provider User ID
identity-provider-user-id.tooltip=Unique ID of the user on the Identity Provider side
identity-provider-username=Identity Provider Username
identity-provider-username.tooltip=Username on the Identity Provider side
pagination=Pagination

browser-flow=Browser Flow
browser-flow.tooltip=Select the flow you want to use for browser authentication.
registration-flow=Registration Flow
registration-flow.tooltip=Select the flow you want to use for registration.
direct-grant-flow=Direct Grant Flow
direct-grant-flow.tooltip=Select the flow you want to use for direct grant authentication.
reset-credentials=Reset Credentials
reset-credentials.tooltip=Select the flow you want to use when the user has forgotten their credentials.
client-authentication=Client Authentication
client-authentication.tooltip=Select the flow you want to use for authentication of clients.
new=New
copy=Copy
add-execution=Add execution
add-flow=Add flow
auth-type=Auth Type
requirement=Requirement
config=Config
no-executions-available=No executions available
authentication-flows=Authentication Flows
create-authenticator-config=Create authenticator config
authenticator.alias.tooltip=Name of the configuration
otp-type=OTP Type
time-based=Time Based
counter-based=Counter Based
otp-type.tooltip=totp is Time-Based One Time Password. 'hotp' is a counter base one time password in which the server keeps a counter to hash against.
otp-hash-algorithm=OTP Hash Algorithm
otp-hash-algorithm.tooltip=What hashing algorithm should be used to generate the OTP.
number-of-digits=Number of Digits
otp.number-of-digits.tooltip=How many digits should the OTP have?
look-ahead-window=Look Ahead Window
otp.look-ahead-window.tooltip=How far ahead should the server look just in case the token generator and server are out of time sync or counter sync?
initial-counter=Initial Counter
otp.initial-counter.tooltip=What should the initial counter value be?
otp-token-period=OTP Token Period
otp-token-period.tooltip=How many seconds should an OTP token be valid? Defaults to 30 seconds.
table-of-password-policies=Table of Password Policies
add-policy.placeholder=Add policy...
policy-type=Policy Type
policy-value=Policy Value
admin-events=Admin Events
admin-events.tooltip=Displays saved admin events for the realm. Events are related to admin account, for example a realm creation. To enable persisted events go to config.
login-events=Login Events
filter=Filter
update=Update
reset=Reset
operation-types=Operation Types
resource-types=Resource Types
select-operations.placeholder=Select operations...
select-resource-types.placeholder=Select resource types...
resource-path=Resource Path
resource-path.tooltip=Filter by resource path. Supports wildcard '*' (for example 'users/*').
date-(from)=Date (From)
date-(to)=Date (To)
authentication-details=Authentication Details
ip-address=IP Address
time=Time
operation-type=Operation Type
resource-type=Resource Type
auth=Auth
representation=Representation
register=Register
required-action=Required Action
default-action=Default Action
auth.default-action.tooltip=If enabled, any new user will have this required action assigned to it.
no-required-actions-configured=No required actions configured
defaults-to-id=Defaults to id
flows=Flows
bindings=Bindings
required-actions=Required Actions
password-policy=Password Policy
otp-policy=OTP Policy
user-groups=User Groups
default-groups=Default Groups
groups.default-groups.tooltip=Set of groups that new users will automatically join.
cut=Cut
paste=Paste

create-group=Create group
create-authenticator-execution=Create Authenticator Execution
create-form-action-execution=Create Form Action Execution
create-top-level-form=Create Top Level Form
flow.alias.tooltip=Specifies display name for the flow.
top-level-flow-type=Top Level Flow Type
flow.generic=generic
flow.client=client
top-level-flow-type.tooltip=What kind of top level flow is it? Type 'client' is used for authentication of clients (applications) when generic is for users and everything else
create-execution-flow=Create Execution Flow
flow-type=Flow Type
flow.form.type=form
flow.generic.type=generic
flow-type.tooltip=What kind of form is it
form-provider=Form Provider
default-groups.tooltip=Newly created or registered users will automatically be added to these groups
select-a-type.placeholder=select a type
available-groups=Available Groups
available-groups.tooltip=Select a group you want to add as a default.
value=Value
table-of-group-members=Table of group members
last-name=Last Name
first-name=First Name
email=Email
toggle-navigation=Toggle navigation
manage-account=Manage account
sign-out=Sign Out
server-info=Server Info
resource-not-found=Resource <strong>not found</strong>...
resource-not-found.instruction=We could not find the resource you are looking for. Please make sure the URL you entered is correct.
go-to-the-home-page=Go to the home page &raquo;
page-not-found=Page <strong>not found</strong>...
page-not-found.instruction=We could not find the page you are looking for. Please make sure the URL you entered is correct.
events.tooltip=Displays saved events for the realm. Events are related to user accounts, for example a user login. To enable persisted events go to config.
select-event-types.placeholder=Select event types...
events-config.tooltip=Displays configuration options to enable persistence of user and admin events.
select-an-action.placeholder=Select an action...
event-listeners.tooltip=Configure what listeners receive events for the realm.
login.save-events.tooltip=If enabled login events are saved to the database which makes events available to the admin and account management consoles.
clear-events.tooltip=Deletes all events in the database.
events.expiration.tooltip=Sets the expiration for events. Expired events are periodically deleted from the database.
admin-events-settings=Admin Events Settings
save-events=Save Events
admin.save-events.tooltip=If enabled admin events are saved to the database which makes events available to the admin console.
saved-types.tooltip=Configure what event types are saved.
include-representation=Include Representation
include-representation.tooltip=Include JSON representation for create and update requests.
clear-admin-events.tooltip=Deletes all admin events in the database.
server-version=Server Version
server-profile=Server Profile
server-disabled=Server Disabled Features
info=Info
providers=Providers
server-time=Server Time
server-uptime=Server Uptime
memory=Memory
total-memory=Total Memory
free-memory=Free Memory
used-memory=Used Memory
system=System
current-working-directory=Current Working Directory
java-version=Java Version
java-vendor=Java Vendor
java-runtime=Java Runtime
java-vm=Java VM
java-vm-version=Java VM Version
java-home=Java Home
user-name=User Name
user-timezone=User Timezone
user-locale=User Locale
system-encoding=System Encoding
operating-system=Operating System
os-architecture=OS Architecture
spi=SPI
granted-roles=Granted Roles
granted-protocol-mappers=Granted Protocol Mappers
additional-grants=Additional Grants
consent-created-date=Created
consent-last-updated-date=Last updated
revoke=Revoke
new-password=New Password
password-confirmation=Password Confirmation
reset-password=Reset Password
credentials.temporary.tooltip=If enabled user is required to change password on next login
remove-totp=Remove TOTP
credentials.remove-totp.tooltip=Remove one time password generator for user.
reset-actions=Reset Actions
credentials.reset-actions.tooltip=Set of actions to execute when sending the user a Reset Actions Email. 'Verify email' sends an email to the user to verify their email address. 'Update profile' requires user to enter in new personal information. 'Update password' requires user to enter in a new password. 'Configure TOTP' requires setup of a mobile password generator.
reset-actions-email=Reset Actions Email
send-email=Send email
credentials.reset-actions-email.tooltip=Sends an email to user with an embedded link. Clicking on link will allow the user to execute the reset actions. They will not have to login prior to this. For example, set the action to update password, click this button, and the user will be able to change their password without logging in.
add-user=Add user
created-at=Created At
user-enabled=User Enabled
user-enabled.tooltip=A disabled user cannot login.
user-temporarily-locked=User Temporarily Locked
user-temporarily-locked.tooltip=The user may have been locked due to failing to login too many times.
unlock-user=Unlock user
federation-link=Federation Link
email-verified=Email Verified
email-verified.tooltip=Has the user's email been verified?
required-user-actions=Required User Actions
required-user-actions.tooltip=Require an action when the user logs in. 'Verify email' sends an email to the user to verify their email address. 'Update profile' requires user to enter in new personal information. 'Update password' requires user to enter in a new password. 'Configure TOTP' requires setup of a mobile password generator.
locale=Locale
select-one.placeholder=Select one...
impersonate=Impersonate
impersonate-user=Impersonate user
impersonate-user.tooltip=Login as this user. If user is in same realm as you, your current login session will be logged out before you are logged in as this user.
identity-provider-alias=Identity Provider Alias
provider-user-id=Provider User ID
provider-username=Provider Username
no-identity-provider-links-available=No identity provider links available
group-membership=Group Membership
leave=Leave
group-membership.tooltip=Groups user is a member of. Select a listed group and click the Leave button to leave the group.
membership.available-groups.tooltip=Groups a user can join. Select a group and click the join button.
table-of-realm-users=Table of Realm Users
view-all-users=View all users
unlock-users=Unlock users
no-users-available=No users available
users.instruction=Please enter a search, or click on view all users
consents=Consents
started=Started
logout-all-sessions=Logout all sessions
logout=Logout
new-name=New Name
ok=Ok
attributes=Attributes
role-mappings=Role Mappings
members=Members
details=Details
identity-provider-links=Identity Provider Links
register-required-action=Register required action
gender=Gender
address=Address
phone=Phone
profile-url=Profile URL
picture-url=Picture URL
website=Website
import-keys-and-cert=Import keys and cert
import-keys-and-cert.tooltip=Upload the client's key pair and cert.
upload-keys=Upload Keys
download-keys-and-cert=Download keys and cert
no-value-assigned.placeholder=No value assigned
remove=Remove
no-group-members=No group members
temporary=Temporary
join=Join
event-type=Event Type
events-config=Events Config
event-listeners=Event Listeners
login-events-settings=Login Events Settings
clear-events=Clear events
saved-types=Saved Types
clear-admin-events=Clear admin events
clear-changes=Clear changes
error=Error

# Authz
# Authz Common
authz-authorization=Authorization
authz-owner=Owner
authz-uri=URI
authz-scopes=Scopes
authz-resource=Resource
authz-resource-type=Resource Type
authz-resources=Resources
authz-scope=Scope
authz-authz-scopes=Authorization Scopes
authz-policies=Policies
authz-permissions=Permissions
authz-evaluate=Evaluate
authz-icon-uri=Icon URI
authz-icon-uri.tooltip=An URI pointing to an icon.
authz-select-scope=Select a scope
authz-select-resource=Select a resource
authz-associated-policies=Associated Policies
authz-any-resource=Any resource
authz-any-scope=Any scope
authz-any-role=Any role
authz-policy-evaluation=Policy Evaluation
authz-select-client=Select a client
authz-select-user=Select an user
authz-entitlements=Entitlements
authz-no-resources=No resources
authz-result=Result
authz-authorization-services-enabled=Authorization Enabled
authz-authorization-services-enabled.tooltip=Enable/Disable fine-grained authorization support for a client
authz-required=Required
authz-show-details=Show Details
authz-hide-details=Hide Details
authz-associated-permissions=Associated Permissions
authz-no-permission-associated=No permissions associated

# Authz Settings
authz-import-config.tooltip=Import a JSON file containing authorization settings for this resource server.

authz-policy-enforcement-mode=Policy Enforcement Mode
authz-policy-enforcement-mode.tooltip=The policy enforcement mode dictates how policies are enforced when evaluating authorization requests. 'Enforcing' means requests are denied by default even when there is no policy associated with a given resource. 'Permissive' means requests are allowed even when there is no policy associated with a given resource. 'Disabled' completely disables the evaluation of policies and allows access to any resource.
authz-policy-enforcement-mode-enforcing=Enforcing
authz-policy-enforcement-mode-permissive=Permissive
authz-policy-enforcement-mode-disabled=Disabled

authz-remote-resource-management=Remote Resource Management
authz-remote-resource-management.tooltip=Should resources be managed remotely by the resource server? If false, resources can be managed only from this admin console.

authz-export-settings=Export Settings
authz-export-settings.tooltip=Export and download all authorization settings for this resource server.

# Authz Resource List
authz-no-resources-available=No resources available.
authz-no-scopes-assigned=No scopes assigned.
authz-no-type-defined=No type defined.
authz-no-uri-defined=No URI defined.
authz-no-permission-assigned=No permission assigned.
authz-no-policy-assigned=No policy assigned.
authz-create-permission=Create permission

# Authz Resource Detail
authz-add-resource=Add Resource
authz-resource-name.tooltip=An unique name for this resource. The name can be used to uniquely identify a resource, useful when querying for a specific resource.
authz-resource-owner.tooltip=The owner of this resource.
authz-resource-type.tooltip=The type of this resource. It can be used to group different resource instances with the same type.
authz-resource-uri.tooltip=An URI that can also be used to uniquely identify this resource.
authz-resource-scopes.tooltip=The scopes associated with this resource.

# Authz Scope List
authz-add-scope=Add Scope
authz-no-scopes-available=No scopes available.

# Authz Scope Detail
authz-scope-name.tooltip=An unique name for this scope. The name can be used to uniquely identify a scope, useful when querying for a specific scope.

# Authz Policy List
authz-all-types=All types
authz-create-policy=Create policy
authz-no-policies-available=No policies available.

# Authz Policy Detail
authz-policy-name.tooltip=The name of this policy.
authz-policy-description.tooltip=A description for this policy.
authz-policy-logic=Logic
authz-policy-logic-positive=Positive
authz-policy-logic-negative=Negative
authz-policy-logic.tooltip=The logic dictates how the policy decision should be made. If 'Positive', the resulting effect (permit or deny) obtained during the evaluation of this policy will be used to perform a decision. If 'Negative', the resulting effect will be negated, in other words, a permit becomes a deny and vice-versa.
authz-policy-apply-policy=Apply Policy
authz-policy-apply-policy.tooltip=Specifies all the policies that must be applied to the scopes defined by this policy or permission.
authz-policy-decision-strategy=Decision Strategy
authz-policy-decision-strategy.tooltip=The decision strategy dictates how the policies associated with a given permission are evaluated and how a final decision is obtained. 'Affirmative' means that at least one policy must evaluate to a positive decision in order for the final decision to be also positive. 'Unanimous' means that all policies must evaluate to a positive decision in order for the final decision to be also positive. 'Consensus' means that the number of positive decisions must be greater than the number of negative decisions. If the number of positive and negative is the same, the final decision will be negative.
authz-policy-decision-strategy-affirmative=Affirmative
authz-policy-decision-strategy-unanimous=Unanimous
authz-policy-decision-strategy-consensus=Consensus
authz-select-a-policy=Select a policy

# Authz Role Policy Detail
authz-add-role-policy=Add Role Policy
authz-no-roles-assigned=No roles assigned.
authz-policy-role-realm-roles.tooltip=Specifies the *realm* roles allowed by this policy.
authz-policy-role-clients.tooltip=Selects a client in order to filter the client roles that can be applied to this policy.
authz-policy-role-client-roles.tooltip=Specifies the client roles allowed by this policy.

# Authz User Policy Detail
authz-add-user-policy=Add User Policy
authz-no-users-assigned=No users assigned.
authz-policy-user-users.tooltip=Specifies which user(s) are allowed by this policy.

# Authz Client Policy Detail
authz-add-client-policy=Add Client Policy
authz-no-clients-assigned=No clients assigned.
authz-policy-client-clients.tooltip=Specifies which client(s) are allowed by this policy.

# Authz Time Policy Detail
authz-add-time-policy=Add Time Policy
authz-policy-time-not-before.tooltip=Defines the time before which the policy MUST NOT be granted. Only granted if current date/time is after or equal to this value.
authz-policy-time-not-on-after=Not On or After
authz-policy-time-not-on-after.tooltip=Defines the time after which the policy MUST NOT be granted. Only granted if current date/time is before or equal to this value.
authz-policy-time-day-month=Day of Month
authz-policy-time-day-month.tooltip=Defines the day of month which the policy MUST be granted. You can also provide a range by filling the second field. In this case, permission is granted only if current day of month is between or equal to the two values you provided.
authz-policy-time-month=Month
authz-policy-time-month.tooltip=Defines the month which the policy MUST be granted. You can also provide a range by filling the second field. In this case, permission is granted only if current month is between or equal to the two values you provided.
authz-policy-time-year=Year
authz-policy-time-year.tooltip=Defines the year which the policy MUST be granted. You can also provide a range by filling the second field. In this case, permission is granted only if current year is between or equal to the two values you provided.
authz-policy-time-hour=Hour
authz-policy-time-hour.tooltip=Defines the hour which the policy MUST be granted. You can also provide a range by filling the second field. In this case, permission is granted only if current hour is between or equal to the two values you provided.
authz-policy-time-minute=Minute
authz-policy-time-minute.tooltip=Defines the minute which the policy MUST be granted. You can also provide a range by filling the second field. In this case, permission is granted only if current minute is between or equal to the two values you provided.

# Authz Drools Policy Detail
authz-add-drools-policy=Add Rules Policy
authz-policy-drools-maven-artifact-resolve=Resolve
authz-policy-drools-maven-artifact=Policy Maven Artifact
authz-policy-drools-maven-artifact.tooltip=A Maven GAV pointing to an artifact from where the rules would be loaded from. Once you have provided the GAV, you can click *Resolve* to load both *Module* and *Session* fields.
authz-policy-drools-module=Module
authz-policy-drools-module.tooltip=The module used by this policy. You must provide a module in order to select a specific session from where rules will be loaded from.
authz-policy-drools-session=Session
authz-policy-drools-session.tooltip=The session used by this policy. The session provides all the rules to evaluate when processing the policy.
authz-policy-drools-update-period=Update Period
authz-policy-drools-update-period.tooltip=Specifies an interval for scanning for artifact updates.

# Authz JS Policy Detail
authz-add-js-policy=Add JavaScript Policy
authz-policy-js-code=Code
authz-policy-js-code.tooltip=The JavaScript code providing the conditions for this policy.


# Authz Aggregated Policy Detail
authz-aggregated=Aggregated
authz-add-aggregated-policy=Add Aggregated Policy

# Authz Permission List
authz-no-permissions-available=No permissions available.

# Authz Permission Detail
authz-permission-name.tooltip=The name of this permission.
authz-permission-description.tooltip=A description for this permission.

# Authz Resource Permission Detail
authz-add-resource-permission=Add Resource Permission
authz-permission-resource-apply-to-resource-type=Apply to Resource Type
authz-permission-resource-apply-to-resource-type.tooltip=Specifies if this permission would be applied to all resources with a given type. In this case, this permission will be evaluated for all instances of a given resource type.
authz-permission-resource-resource.tooltip=Specifies that this permission must be applied to a specific resource instance.
authz-permission-resource-type.tooltip=Specifies that this permission must be applied to all resources instances of a given type.

# Authz Scope Permission Detail
authz-add-scope-permission=Add Scope Permission
authz-permission-scope-resource.tooltip=Restrict the scopes to those associated with the selected resource. If not selected all scopes would be available.
authz-permission-scope-scope.tooltip=Specifies that this permission must be applied to one or more scopes.

# Authz Evaluation
authz-evaluation-identity-information=Identity Information
authz-evaluation-identity-information.tooltip=The available options to configure the identity information that will be used when evaluating policies.
authz-evaluation-client.tooltip=Select the client making this authorization request. If not provided, authorization requests would be done based on the client you are in.
authz-evaluation-user.tooltip=Select an user whose identity is going to be used to query permissions from the server.
authz-evaluation-role.tooltip=Select the roles you want to associate with the selected user.
authz-evaluation-new=New Evaluation
authz-evaluation-re-evaluate=Re-Evaluate
authz-evaluation-previous=Previous Evaluation
authz-evaluation-contextual-info=Contextual Information
authz-evaluation-contextual-info.tooltip=The available options to configure any contextual information that will be used when evaluating policies.
authz-evaluation-contextual-attributes=Contextual Attributes
authz-evaluation-contextual-attributes.tooltip=Any attribute provided by a running environment or execution context.
authz-evaluation-permissions.tooltip=The available options to configure the permissions to which policies will be applied.
authz-evaluation-evaluate=Evaluate
authz-evaluation-any-resource-with-scopes=Any resource with scope(s)
authz-evaluation-no-result=Could not obtain any result for the given authorization request. Check if the provided resource(s) or scope(s) are associated with any policy.
authz-evaluation-no-policies-resource=No policies were found for this resource.
authz-evaluation-result.tooltip=The overall result for this permission request.
authz-evaluation-scopes.tooltip=The list of allowed scopes.
authz-evaluation-policies.tooltip=Details about which policies were evaluated and their decisions.
authz-evaluation-authorization-data=Response
authz-evaluation-authorization-data.tooltip=Represents a token carrying authorization data as a result of the processing of an authorization request. This representation is basically what Keycloak issues to clients asking for permissions. Check the 'authorization' claim for the permissions that were granted based on the current authorization request.
authz-show-authorization-data=Show Authorization Data

kid=KID
keys=Keys
all=All
status=Status
keystore=Keystore
keystores=Keystores
add-keystore=Add Keystore
add-keystore.placeholder=Add keystore...
view=View
active=Active

Sunday=Sunday
Monday=Monday
Tuesday=Tuesday
Wednesday=Wednesday
Thursday=Thursday
Friday=Friday
Saturday=Saturday

user-storage-cache-policy=Cache Settings
userStorage.cachePolicy=Cache Policy
userStorage.cachePolicy.option.DEFAULT=DEFAULT
userStorage.cachePolicy.option.EVICT_WEEKLY=EVICT_WEEKLY
userStorage.cachePolicy.option.EVICT_DAILY=EVICT_DAILY
userStorage.cachePolicy.option.MAX_LIFESPAN=MAX_LIFESPAN
userStorage.cachePolicy.option.NO_CACHE=NO_CACHE
userStorage.cachePolicy.tooltip=Cache Policy for this storage provider.  'DEFAULT' is whatever the default settings are for the global user cache.  'EVICT_DAILY' is a time of day every day that the user cache will be invalidated.  'EVICT_WEEKLY' is a day of the week and time the cache will be invalidated.  'MAX-LIFESPAN' is the time in milliseconds that will be the lifespan of a cache entry.
userStorage.cachePolicy.evictionDay=Eviction Day
userStorage.cachePolicy.evictionDay.tooltip=Day of the week the entry will become invalid on
userStorage.cachePolicy.evictionHour=Eviction Hour
userStorage.cachePolicy.evictionHour.tooltip=Hour of day the entry will become invalid on.
userStorage.cachePolicy.evictionMinute=Eviction Minute
userStorage.cachePolicy.evictionMinute.tooltip=Minute of day the entry will become invalid on.
userStorage.cachePolicy.maxLifespan=Max Lifespan
userStorage.cachePolicy.maxLifespan.tooltip=Max lifespan of a user cache entry in milliseconds.
user-origin-link=Storage Origin
user-origin.tooltip=UserStorageProvider the user was loaded from
user-link.tooltip=UserStorageProvider this locally stored user was imported from.

disable=Disable
disableable-credential-types=Disableable Types
credentials.disableable.tooltip=List of credential types that you can disable
disable-credential-types=Disable Credential Types
credentials.disable.tooltip=Click button to disable selected credential types
credential-types=Credential Types
manage-user-password=Manage Password
disable-credentials=Disable Credentials
credential-reset-actions=Credential Reset
ldap-mappers=LDAP Mappers
create-ldap-mapper=Create LDAP mapper






